The Basics of Performing a Waterless Car Wash

Let’s start by being clear about something - using a waterless wash product is not hard. I know, it can sound intimidating at the start. Where’s the hose? Where are the suds? But trust me, after cleaning just a few panels you’ll be hooked on the process. The speed at which you are able to simultaneously clean and protect your car in one simple step is quite amazing. To help anyone just getting into this method of washing, we’ve assembled a list of best practices.

1. Work from the top of the car down. 

Car’s naturally accumulate dirt along the lower body panels and you’ll want to tackle these areas last. Start with the roof->hood->door panels->trunk->lower body panels. Be sure to pay extra attention near wheel wells where heavy debris t.

Cleaning Sequence

2. Use quality microfiber towels. 

Outside of the waterless product you use, make sure you have a good stock of high quality microfiber towels. We suggest towels with a 300 GSM rating, as they offer the best combination of cleaning and polishing. While many people think that using a higher GSM towel is better, it can surprisingly work against you. We’ve found that those fluffy 400+ GSM  towels do not clean as effectively as their lower 300 GSM counterparts.

3. Fold your towel in half and half again.

You’ll want to maximize the number of sides on your towel. By folding in half twice, you’ll effectively get eight sides to work with. Use at least one side per panel depending on how dirty the vehicle is.

foldedtowel

4. Work in small sections. 

Start with a 2ft x 2ft area for applying and buffing off the waterless formula. If your car is completely cool and relatively clean you may be able to work in larger sections.

2ftcleaningsection

5. Wipe in one direction. 

Follow the contours of the car’s body and wipe in the direction of normal airflow over the panel. This will help prevent re-soiling the areas of the car you’ve already cleaned. You should not use a circular buffing motion as if you were using a wax.

onedirectionwipe

6. Apply light pressure on first stroke to remove contaminants. 

You’ll want to apply light pressure on your first pass over the panel. We suggest using the wipe and ‘lift’ technique where you are simultaneously rotating the towel while wiping across the surface.

wipeandlift

7. Keep your buffing towel separate, clean and dry.

Pick one set of towels for the cleaning and one for buffing. For best results you want to have your buffing towels near 100% dry. Many times we’ve seen detailers use two towel colors so it’s easy to remember which is which.

cleaningpolishing

Eco Touch manufactures a complete line of professional detailing supplies in Dover, NH. We are a family owned and operated company since 2007. Have any other questions? Call us today at 888.375.7970.

James Dudra on Google+

Five Questions To Ask Before Hiring a Detailing Company

1) Are you insured?

Any competent detailing company will carry what’s known as ‘garage keepers’ insurance. Like in any industry, accidents do unfortunately happen from time to time. Whether it’s from the detailing process itself such as damage to the paint or while moving your vehicle in and out of the shop, it’s important for any professional detailing company to have themselves (and you) covered. 

2) What chemicals/products do you use?

We spend an amazing amount of time in our cars these days. Whether you’re just commuting to work or moving the kids around, it’s important to know what chemicals have been used during the detailing process. Many traditional detailing products contain cheap ingredients which can lead to health problems with prolonged exposure. Make sure you ask your detailer for MSDS sheets so you can confirm for yourself what’s being used around you and your family.

3) Do you have any customer referrals?

Here you could simply start by asking the company directly for customers who’ve received a similar service. Of course, the detailing company will likely just refer you out to satisfied clients, so you may want to go on the web and check out websites such as yelp.com or bbb.org to get a more realistic picture of company’s rating.

4) How long should I expect the protectants and coatings to last?

Depending on the service level you select, most detailing companies will apply sealants and protectants to your vehicle. Get a clear understanding and expectation of how long these should last. Be wary of any company that claims a protectant/sealant will last for 6+ months as the majority of products on the market today will begin to degrade after 2 – 3 months from application.

5) What is included/not included with my service package?

Make sure you fully understand what you’re paying for. Many times a company will have you bring your vehicle to the shop first for a walkthrough to address any areas which will take extra time and incur additional fees. Excessive pet hair, odors, stains, damaged/scratched paint will certainly be addressed prior to starting the work so you’re not left with a surprise bill at the end of your detail.

James Dudra on Google+