The Basics of Performing a Waterless Car Wash

Let’s start by being clear about something - using a waterless wash product is not hard. I know, it can sound intimidating at the start. Where’s the hose? Where are the suds? But trust me, after cleaning just a few panels you’ll be hooked on the process. The speed at which you are able to simultaneously clean and protect your car in one simple step is quite amazing. To help anyone just getting into this method of washing, we’ve assembled a list of best practices.

1. Work from the top of the car down. 

Car’s naturally accumulate dirt along the lower body panels and you’ll want to tackle these areas last. Start with the roof->hood->door panels->trunk->lower body panels. Be sure to pay extra attention near wheel wells where heavy debris t.

Cleaning Sequence

2. Use quality microfiber towels. 

Outside of the waterless product you use, make sure you have a good stock of high quality microfiber towels. We suggest towels with a 300 GSM rating, as they offer the best combination of cleaning and polishing. While many people think that using a higher GSM towel is better, it can surprisingly work against you. We’ve found that those fluffy 400+ GSM  towels do not clean as effectively as their lower 300 GSM counterparts.

3. Fold your towel in half and half again.

You’ll want to maximize the number of sides on your towel. By folding in half twice, you’ll effectively get eight sides to work with. Use at least one side per panel depending on how dirty the vehicle is.

foldedtowel

4. Work in small sections. 

Start with a 2ft x 2ft area for applying and buffing off the waterless formula. If your car is completely cool and relatively clean you may be able to work in larger sections.

2ftcleaningsection

5. Wipe in one direction. 

Follow the contours of the car’s body and wipe in the direction of normal airflow over the panel. This will help prevent re-soiling the areas of the car you’ve already cleaned. You should not use a circular buffing motion as if you were using a wax.

onedirectionwipe

6. Apply light pressure on first stroke to remove contaminants. 

You’ll want to apply light pressure on your first pass over the panel. We suggest using the wipe and ‘lift’ technique where you are simultaneously rotating the towel while wiping across the surface.

wipeandlift

7. Keep your buffing towel separate, clean and dry.

Pick one set of towels for the cleaning and one for buffing. For best results you want to have your buffing towels near 100% dry. Many times we’ve seen detailers use two towel colors so it’s easy to remember which is which.

cleaningpolishing

Eco Touch manufactures a complete line of professional detailing supplies in Dover, NH. We are a family owned and operated company since 2007. Have any other questions? Call us today at 888.375.7970.

James Dudra on Google+

About these ads

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s